Deepcool Matrexx 30 Micro Atx Case

MATREXX 70

Novel Adaptibility

A new-concept chassis particularly designed for the enjoyment of DIY. By adopting numerous novel structural designs, its compages yields convenience and flexibility in PC building. As a mid-tower case, It′s also endowed with arable space that supports upwardly to East-ATX motherboard.

• One-touch-release Front end Console

  

  With the bottom hooked to case structure, and the peak locked by a spring buckle, the front console of MATREXX 70 can be released to "dismounting set"state with but one touch.

  Once the "Open up" button is pressed, the forepart panel will be released and held at a five°affections, and is set up to exist pulled out.

• Like shooting fish in a barrel-to-install Side Panel

  

  

  The side panel is fixed with i groove + ii screws blueprint, which makes installation much easier.

  Plus, this unique fixation method will grant the drinking glass panel even stress distribution, hence reduces the run a risk of cracking.

  

Removable Radiator Holder

The radiator holder simplifies the installation of liquid coolers and replacement of the radiators.It′s especially effort-saving when you demand to install radiators or fans on different sides of the holder.

The holder supports up to 360mm radiator or three*140mm fans.

Removable tinted tempered Drinking glass PSU Shroud

In MATREXX 70, DeepCool creatively used tinted tempered glass every bit the top cover of PSU shroud, which is pioneering in the industry.

Lighting Effects of LED Strip on the Power Shield (LED Strips are non included in the case）

Flexible Ventilation Solutions with Fantabulous Performance

With air intake options at front and bottom, exhaust options at the top and rear, MATREXX 70 provides highly flexible ventilation solutions. Meanwhile the 15mm-broad front intake pigsty guarantees sufficient air supply, together with the low friction textile practical on all meshes, the cooling efficiency is maximized.

• Motherboard support

  E-ATX( Upwardly to 330mm )
  ATX
  Micro-ATX
  Mini-ITX

  

• Arable Storage Back up

  A full of 6* 2.five'' drives or four*two.5'' + 2* 3.5'' drives can be mounted in MATREXX lxx. 2 SSD bays are fixed at the back of motherboard tray for quick installation. ii* 3.five/two.5'' hard bulldoze trophy are mounted at the bottom of the case which are relocatable and removable.After removal, 2*120mm fans tin be installed at the location.

  

• Spacious Interior

  The case's dimensions are 483×228×492mm, offer gigantic room to manage cables (170mm motherboard tray-to-glass clearance, 30mm motherboard tray-to-back plate clearance).

  

Graphic cards support up to 380mm

Equipped with big spacing - 170mm( Belfry Room ) and 30mm ( cable sorting at the rear )

Four 2.5inch independent difficult disk lots and ii 3.five/two.5inch hard disk spaces.

As the dust screens are installed at the top, bottom and forepart, information technology provides remarkable anti-dust capabilities while beingness piece of cake to clean.

Technical Spec

Motherboards	E-ATX/ATX/Micro ATX/Mini-ITX
Case Type	Middle Tower
Materials	ABS+SPCC+Tempered Drinking glass
Product Dimensions (L×W×H)	483×228×492(L×W×H)
Net Weight	8.89 kg
Gross Weight	10.31 kg
v.25' Drive Bays	0
iii.v' Drive Bays	two
2.5' Bulldoze Trophy	4
I/O Ports	2×USB3.0/1×USB2.0/1xAudio(HD)/1xMic
Expansion Slots	7 +2
Cooling Fans Support	Pre-installed: Rear: i×120mm. Optional: Front end: 3×120/140mm; Pinnacle: 3×120/140mm
Cablevision Management	30mm Clearance
Liquid Libation Support	Front: 120/140/240/280/360mm radiator; Height: 120/140/240/280/360mm radiator; Rear: 120mm radiator
Power Supply Blazon	ATX PS2 (maximum length: 200mm)
CPU Cooler Meridian Limit	170mm
VGA Length Limit	380mm (horizontal)/360mm (vertical)
Carton Dimension (LxWxH)	537×285×539mm
EAN	6933412713753
P/North	DP-ATX-MATREXX70-BKG0P

DeepCool Matrexx 70 Review - Is this E-ATX Instance Worth $70...?!

Hither is the DeepCool Matrexx 70, an Due east-ATX instance. It offers the drinking glass PSU shroud cover and quick detachable panels. Moreover, does it agree up good with the basics similar temperatures and build quality? Let's check it out!

Source: https://www.deepcool.com/products/Cases/fulltowercases/Matrexx-70-Tempered-Glass-Mid-Tower-ATX-Case/2021/4651.shtml

Share this post